VIRTUAL TRAINING COURSES

Are you looking for industry-relevant virtual training courses? E2G offers both API-U and E2G Training Institute (ETI) training courses virtually using the MS Teams platform. You will learn from a team of highly skilled and knowledgeable engineers who have 20+ years of industry experience. All training courses can be customized to meet your organization’s training needs and qualify as activities for API’s CPD requirements.

Are you looking for in-person training course options? Click here.

 

View Calendar of Events

Request Custom Training or Receive More Info on our Courses

Virtual Training Courses

Damage Mechanisms (API-U)

This damage mechanisms training course covers an overview of basic metallurgy and a description of the most common refining processes. Its major focus includes detailed discussions of the key refining damage mechanisms addressed in API RP 571 and examples of equipment damage and failures. 

Upcoming Courses:

Damage Mechanisms (API RP 571)

Oct 24 @ 9:00 am Oct 28 @ 1:00 pm EDT

This Damage Mechanisms training course covers an overview of basic metallurgy and a description of the most common refining processes. Its major focus includes detailed discussions of the key refining damage mechanisms addressed in API RP 571 and examples of equipment damage and failures. It also includes discussion of typical non-destructive evaluation (NDE) methods applicable for detection of damage related to the specific damage mechanisms. Many problems can be prevented or eliminated if the precursors to damage are observed and monitored so that any potential damage is mitigated. This training course will teach attendees to identify damage mechanisms and potential risk areas. The instructors will discuss the background and logic behind the document and provide relevant case histories.

$2050 *Save by registering at least 45 days before 1st day of class

Fitness-for-Service (API-U)

This fitness-for-service (FFS) training course will provide attendees with an introduction to API 579-1/ASME FFS-1. The focus of the course content is the Volumetric Metal Loss parts of API 579 – Parts 1, 2, 4, 5, and 6.

Upcoming Courses:

Fitness-For-Service: Volumetric Metal Loss (Parts 1, 2, 4, 5, and 6 of API 579)

Oct 24 @ 9:00 am Oct 26 @ 1:00 pm EDT

The training session begins with the definition of fitness-for-service (FFS) and introduces the Life-Cycle Management (LCM) framework as a process to manage the entire life-cycle of fixed equipment including design, construction, in-service use, repair, and retirement. Opportunities for FFS assessments are presented from both the traditional reactive mode and from an opportunistic proactive mode. General background information, as presented in Part 1 of the API 579-1/ASME FFS-1 Fitness-for-Service (API FFS) standard with regards to its scope, organization and use, and the responsibilities and qualifications of the parties involved with FFS assessments, is reviewed. The general eight-step procedure from Part 2 of API FFS is presented, which is used for all of the assessments contained in API FFS and introduces the three common acceptance criteria used in FFS assessments including: Allowable Stress/Remaining Life, Remaining Strength Factor (RSF), and the Failure Assessment Diagram (FAD).

$1260 *Save by registering at least 45 days before 1st day of class

Fundamentals of Asset Lifecycle Management (ETI)

The course provides a practical understanding of the basics of piping design and analysis rules of the ASME Process Piping Code, B31.3 (ASME B31.3). You’ll gain an understanding of ASME B31.3, including piping component and system design, material considerations, fabrication, and examination and testing.

Upcoming Courses: to be announced

Piping Vibration (ETI)

This course provides an overview of piping vibration measurement and severity analysis, guidance on identification, evaluation, and mitigation of piping vibration problems.

Upcoming Courses:

Pressure Relieving Systems (API-U)

This pressure relieving systems training course will provide attendees with practical experience involving pressure relief devices (PRDs).  This course covers proper sizing, selection, and installation of PRDs to ensure adequate overpressure protection is provided and reduce hazards if a PRD discharges.

Upcoming Courses:

Pressure Relieving Systems (API 520/521)

Oct 31 @ 9:00 am Nov 4 @ 2:00 pm EDT

This Pressure Relieving Systems virtual training course will provide attendees with practical experience involving Pressure Relief Devices (PRDs).  This course covers proper sizing, selection, and installation of PRDs to ensure adequate overpressure protection is provided and reduce hazards if a PRD discharges.  The course content includes 3% inlet pressure drop requirements, sizing of PRDs in two-phase flashing service, and operation of PRDs and the effects of back pressure on valve stability and performance.  In addition to the API 520/521 Standards (including content from the newly published 2020 editions), the course also covers protection of atmospheric storage tanks per API 2000 Standard and boilers per ASME Boiler & Pressure Vessel Code, Section I.  The instructors will discuss the background and logic behind the document procedures and intersperse some example problems.

$2050 *Save by registering at least 45 days before 1st day of class

Process Piping (ETI)

The course provides a practical understanding of the basics of piping design and analysis rules of the ASME Process Piping Code, B31.3 (ASME B31.3). You’ll gain an understanding of ASME B31.3, including piping component and system design, material considerations, fabrication, and examination and testing.

Upcoming Courses:

Process Piping Course

Nov 28 @ 9:00 am Dec 2 @ 1:00 pm EST

This Process Piping course provides the learner a basic, practical understanding of the piping design and analysis requirements of the ASME B31.3 Process Piping Code.  The course details piping component and system design, material considerations, fabrication, and examination and testing. It focuses on design loads for piping, design for internal pressure, piping flexibility analysis, branch reinforcement calculations, temperature considerations, piping layout and support design, and equipment nozzle load limits.

$2050 *Save by registering at least 45 days before 1st day of class

Risk-Based Inspection (API-U)

This API-branded, risk-based inspection (RBI) training course gives attendees the basic understanding of RBI principles, recommendations, requirements, and the methodologies of API RP 580 and 581.

Upcoming Courses:

Risk-Based Inspection (API RP 580/581)

Oct 31 @ 9:00 am Nov 4 @ 1:00 pm EDT

This API-U approved Risk-Based Inspection (RBI) virtual training course provides attendees with a basic understanding of RBI principles and methodologies given in API RP 580 and 581. With a heavy emphasis on API RP 581 technology, students learn how to apply RBI technology to processing equipment by determining the probability of failure, the consequence of failure, and risk.  The culmination of the course occurs when attendees learn how to plan the equipment’s next inspection based on risk criteria. Additionally, the instructors facilitate discussions on developing an RBI program using industry best practices to avoid common pitfalls and mistakes when implementing and maintaining your RBI program. Typical risk reduction and the benefits of shifting from a time or conditioned-based inspection program to an RBI approach are also presented. Finally, the instructors present a detailed, comprehensive example problem to demonstrate the step-by-step risk calculations for a typical pressure vessel using the methodology of API RP 581.

$2050 *Save by registering at least 45 days before 1st day of class

Storage Tanks (ETI)

During this course, storage tank engineers will gain a practical understanding of the basics of tank design and analysis, including material considerations, fabrication, and examination.

Upcoming Courses:

Storage Tanks Course

Oct 10 @ 9:00 am Oct 14 @ 1:00 pm EDT

The design and analysis of welded storage tanks can involve the application of a number of interrelated requirements of API 650. Application of these requirements may not always be intuitive to personnel responsible for storage tank integrity. This course will provide the attendee a practical understanding of the basics of aboveground storage tank design and analysis. Many aspects of tank design are presented such as roof designs, foundations, materials considerations, fabrication, examination, and testing. The course emphasizes these design elements relative to API 650 requirements, but other storage tank designs, such as API 620 tanks, are also covered within the course.

$2050 *Save by registering at least 45 days before 1st day of class

Questions? Visit Our FAQ Page

View Our Calendar of Events